S W I T C H G E A R S

LV HRC - BS DESIGN FUSE WAYS, 3/4 POLES UPTO 30A

LV HRC Fuse Bases to BS Design can combined to form distribution system having desired number of electrical circuits and suitable for distribution application in Dist. Boards, Service Cabinets, Feeder Pillars etc.

CHARACTERISTICS - Design

• Vertical Design suitable for accommodating
  92 mm fixing center fuse carriers to BS 88.
   
• Copper links are manufactured from ETP grade
  high conductivity copper and are duly tin plated.
   
• We can manufacture the fuse way to exact customer
  requirement in terms of copper cross section depending
  upon current rating, inter link spacing or suitability to
  82.5 or 92 mm fixing centers.
   
• Mounted on paper based laminate having very high
  insulation strength with equally good mechanical properties
  in terms of tensile, flexural, shear & impact strength.
   
• Insulated Inter phase barriers of DMC are provided between
  the phases which not only prevents phase to phase faults but
  also makes it impossible to insert fuse carriers between
  different phases.
   
• High tensile hardware of grade 8.8 provided on the cable
  side links offer ease of termination.
   
• Type tested at Central Power Research Institute -
  One of the premier testing institutes in India installed
  on our Feeder Pillars.

*The company follows a policy of continuous development and improvement of its products and hence products supplied may differ from those described & illustrated in this page.